Filter
Top Products
Setting up the multimedia controller
22
Connecting outputs
To connect to a 568 Digital Surround
Processor
562V Multimedia Controller
Digital lead
568 Digital Surround Processor
DIGITAL OUTPUT
MAIN
DIGITAL INPUT
CD/D1
ANALOGUE INPUT
TV/A1
MAIN
ANALOGUE
Audio lead
● Connect the MAIN digital output of the 562V to the CD/D1
digital input socket of the 568, using high-quality 75Ω
screened cable.
● Connect the MAIN analogue output of the 562V to the TV/A1
analogue input socket of the 568, using screened audio cable.
This takes advantage of the high-quality 24-bit analogue-to-
digital converter in the 568 to perform the conversion of
analogue sources.
● Route the video through the 568 to take advantage of the
on-screen display.
● Configure the 562V to Type 1; see Choosing standard
settings, page 28.
● Configure each 562V source as required; see Setting up
sources, page 41.
● Configure the 568 to a 562 Type option; see the 568 Digital
Surround Processor User Guide for more information.
To connect to Meridian DSP
loudspeakers
MAIN
DIGITAL
OUTPUT
COMMS
COMMS
OUTPUT INPUT
DIGITAL
OUTPUT
DIGITAL INPUTS
21
COMMS
OUTPUT INPUT
DIGITAL
OUTPUT
DIGITAL INPUTS
21
S5 lead
DSP5000 – Main R DSP5000 – Main L
562V Multimedia Controller
M5 lead
● Connect one of the COMMS sockets on the 562V, and the
MAIN digital output, to one of the digital speakers using an
M5 lead.
● Link the two digital speakers together using an S5 lead as
shown in the illustration.