Troubleshooting
50
Maintenance
Cleaning
When cleaning the multimedia controller bear in mind that the
front of the multimedia controller is plastic, and the display
panel and lid are glass.
Disconnect the power cord before cleaning the unit.
Note: Do not use abrasive cleaners on any part of the
multimedia controller.
To clean the case, display panel, and
keypad
● Use a slightly damp cloth.
Ensure that no water is allowed to get inside the case, and do
not reconnect the power until you are certain that the
multimedia controller is completely dry.
To clean the audio and video
connections
The audio and video sockets on the rear of the multimedia
controller are gold-plated and need no cleaning if gold-plated
phono plugs are used. Otherwise, it is recommended that you
unplug and reconnect the plugs at least once a year.
A proprietary contact cleaner can be used to some advantage.
To change the mains fuse
Fuse
Spare
● Remove the mains connector, and pull out the drawer next to
the power input to access the fuses.
Before replacing a blown fuse, if possible ascertain the cause of
the failure.
The fuse drawer includes a spare fuse. This should be replaced
by one of the same rating.