Metz 72 TF 80, 72 TF 81, 72 TF 82, 72 TF 83, 72 TF 86, 72 TF 88, 84 TF 88, 72 TF 89 Flat Panel Television User Manual


 
44
Call this function and return
to the normal picture
Adjusting the slow-motion
delay
11. Special picture effects
Slow-motion
Slow-motion delay
*
*
A
or or
B
C
*
Call this function and return
to the normal picture
Before the 9x multipicture function can be used, it must be
programmed as a function in the menu „Function
keys“.
The section „Equipment configuration, Assigning
the
function keys“ describes how this is done.
This function is similar to a slow-motion display. Eightof the
nine pictures on the screen show still pictures from the cur-
rent programme (or video film), while the picture at the bot-
tom right is a moving picture of the current programme (or a
video film).
This function can also be combined with the still picture function.
* Depending on how the function keys are program-
med.
11. Special picture effects
9x multipicture
*
A
or or
B
C
*
*
OK
P
+
+
-
AV
--/-
-
P
123
456
789
0
A
B
TV
?
MENU
Equipm. configuration
?
MENU
return Help
TV
picture
REC
Ȅ
Prog. change settings
RGB priority: Yes
Slow motion delay 1,0s
Sound settings: Yes
Display configuration
store ?
OK
AV
696+05B1-GB
Before the slow-motion function can be used, it must be
programmed as a function in the menu „Function keys“.
The section „Equipment configuration, Assigning the
function keys“ describes how this is done.
When this function is called, the screen is divided into nine
small fields, each of which displays a still picture, updated
every few seconds, from the current programme.
This function can also be combined with the still picture
function.
* Depending on how the function keys are programmed
The slow-motion delay is in the interval at which indivi-
dual frames are displayed in slow-motion mode.
This delay can be adjusted in steps of 0.1 seconds bet-
ween 0.1 and 2.0 seconds.
Note: this setting does not apply to the programme
scanning functions with three or nine pictures.
Press this key on the remote
control....
The screen displays Explanation
Call the zoom function and
return to the normal picture
Before the film-in-photo function can be used, it must be
programmed as a function in the menu „Function keys“.
The section „Equipment configuration, Assigning the
function keys“ describes how this is done.
When the programmed function key is pressed, the
picture is frozen and a small box with a photo is dis-
played at the top left corner of the screen.
The current programme (or video film) continues to run
in this small box.
This function is not possible on PIP televisions!
11. Special picture effects
Film in photo
red
MENU
white
red
red
+
-