Metz 72 TF 80, 72 TF 81, 72 TF 82, 72 TF 83, 72 TF 86, 72 TF 88, 84 TF 88, 72 TF 89 Flat Panel Television User Manual


 
64
Open the NEXTVIEW programme magazine and
select the programme to be recorded with the
keys.
If you have a VCR connected:
- switch on the VCR.
-
Press the red key on the remote control of your TV.
- The TV timer is programmed.
- Programme a timer on the VCR connected to
the AV programme position with the date and
time so that it can record the programme sup-
plied by the TV timer.
P
-
P
+
18. Recording a programme
Error messages Cause Remedy
2. Recording a programme
with a VCR
This Evening
Mi. 13:00:41
-22.10
-00.00
-21.15
-21.15
-21.10
20.15 RTL 2
Kojak - Tod eines Polizisten
20.15 ARD
16. Fußball-WM '98
20.15 ZDF
Man nennt es Liebe
20.15 RTL
Alarm für Cobra 11
20.15 SAT 1
Kommissar Rex
Today
Preview
Sort
Subjects
Record
Select
programmes
View
Programmes
from . . .
TV picture
OK
TV
09
NV-04-GB
It was not possible to programme the timer
in the VCR.
This station does not transmit data.
This station is not stored in the receiver of
your VCR. The data for the programme have
been saved in the TV timer and will be
made available to the VCR at the starting
time.
• Switch on the VCR.
• Press the red key on the remote control
of your TV again
Wait for a few minutes and press the C key
again, or select another NEXTVIEW station
(see „Configuring NEXTVIEW“).
Programme a timer in the VCR connected to
the AV programme position to the same
starting and ending times as the TV timer.
P
+
P
-
red
TV timer was programmed.
Please programme the VCR timer.
Timer could not be programmed
!
No data available
!
TV timer was programmed.
Please programme the VCR timer.
C
/
NEXTVIEW
Press this key on the remote
control....
The screen displays Explanation