Metz 72 TF 80, 72 TF 81, 72 TF 82, 72 TF 83, 72 TF 86, 72 TF 88, 84 TF 88, 72 TF 89 Flat Panel Television User Manual


 
47
2. Changing the programme
position
1. Calling the PIP picture
3. Swapping the pictures
4. Changing the size and
position of the PIP picture
5. Turning off the PIP function
When you press the red key, the small picture appears
and displays the same programme as the large picture.
The following settings are possible:
Large picture displays a terrestrial or cable TV station
,
the small picture comes from:
- Large picture displays a terrestrial or cable TV station,
- the EURO 1/2/3 programme position,
- the phono programme position.
Only the programme position for the main picture can
be changed with the numerical keys.
The contents of the two pictures can be swapped by
pressing the key.
PRG.
Pressing the red key switches off the PIP function and
the screen displays the programme position to which
the small picture was set.
Pressing the key switches off the PIP function and
the screen displays the programme position to which
the main picture was set.
TV
The PIP picture can be moved to the four corners of
the screen by pressing the II key.
The size of the PIP picture can be reduced by about
25% by pressing the key. Pressing this key again
restores the picture to its original size.
IJ
12. PIP function
Picture-in-picture
0
1 2 3
4 5 6
7 8 9
ARD
ARD
PRG.
ZDF
ZDF
ZDF
ZDF
ZDF
IJ
TV
Press this key on the remote
control....
The screen displays Explanation
red
red