Mitsubishi Electronics 164 SERIES Flat Panel Television User Manual


 
3. TV Features 21
For assistance call 1(800) 332-2119
Camera Images and Music Files
continued
Sleep Timer
The Sleep Timer turns the TV off after the length of time
you set. To set the TV to turn on at a certain time of
day, see the Setup > Timer menu on page 27.
Setting the Sleep Timer
Press
1.
SLEEP
.
Press
2.
SLEEP
additional times to increase the time in
30-minute increments up to the maximum of 120
minutes.
Press
3.
EXIT
or wait five seconds without pressing any
keys for the message to clear.
Viewing or Changing the Sleep Timer
Press
1.
SLEEP
to display the on-screen message.
Press
2.
SLEEP
additional times to change the time
before the TV powers off. To cancel the Sleep
Timer, press
SLEEP
repeatedly until OFF is dis-
played.
Photos and Moving Video
as Composite Video
Connect the camera to the TV using a composite video
cable and control the slide show or movie through the
camera. The display resolution will be standard-defini-
tion (480i).
Refer to the owner’s manual supplied with the
1.
camera for instructions needed for this setup.
Set the camera’s output signal type to
2.
NTSC and
put the camera into playback mode.
With the camera still turned on, connect your digital
3.
camera’s composite video cable (usually yellow) to
the TV’s
Y/VIDEO
jack. To hear audio, connect the
camera’s audio output cable to the
AUDIO
L
jack.
Optional
Audio Cable
TV
Camera connection using a composite video cable
When the
4.
New Device Found screen displays,
assign the name Camcorder.
Press
5.
EXIT
to close the New Device Found screen.
Highlight the icon for the camera input and press
6.
ENTER
.
If viewing photos, advance through the images
7.
manually or set the camera to advance automati-
cally.
If viewing photos, control the slideshow from the
8.
camera. Advance through the images manually or
check if the camera can advance automatically.