Filter
Top Products
22 3. TV Features
For assistance call 1(800) 332-2119
Positioning the TV
The TV’s built-in speaker array can be set up to reflect
sound off the room walls to create a surround sound effect.
Center the seating area in front of the TV and at •
least six feet away.
Arrangements that give good results:•
If the room is an odd shape, locate the TV to •
take best advantage of wall reflections.
Avoid locations that may distort sound reflec-•
tions.
Connecting the TV
To hear digital surround sound, the TV must be con-
nected to a digital surround sound source. The sur-
round sound source can be on an HDMI input or the
ANT
input (for some digital broadcasts). Other stereo
connections will provide Dolby Pro Logic surround
sound.
Sound Projector
Enter the room dimensions and layout information
2.
requested in the screen. To change measurements,
press or enter numbers using the remote con-
trol’s keypad.
Press
3.
EXIT
to exit and save settings.
Play some sample audio to check sound quality.
4.
If further adjustment is needed, use the Custom
menu as described next.
Custom Menu
Use the Custom menu after defining the room layout.
From the
1.
Sound > SoundPro menu go to the
CUSTOM menu.
Position yourself in your usual viewing location.
2.
Remain in this position, looking at the TV, while
making the following adjustments.
Controls in the SoundPro > Custom menu adjust the
TV’s sound output.
Manual Setup
Manual setup is available for all models.
Note: If you have already performed Auto setup, any
manual adjustments will erase all settings cre-
ated during Auto setup.
Press
1.
MENU
and go to Sound > SoundPro.