Mitsubishi Electronics LT-4260 Flat Panel Television User Manual


 
20
Set-Back Conf iguration Setup (continued)


Your Mitsubishi LCD display supports VGA, SVGA,
XGA, and WXGA PC resolutions only.
See Appendix B: Supported PC Resolutions, P. 61
a. Connect a Mini D-sub 15-pin (RGB) cable from
the LCD Display back panel to PC or Macintosh®
back panel.
b. Connect a PC Audio Cable (or 1/8” stereo
mini jack cable) from the LCD side panel to
PC or Macintosh back panel.




HD-6000 Back Panel (section detail) LCD Display Back Panel (section detail)
Figure 7. Connecting Computer
LCD Display Side Panel
to PC or Macintosh® back panel
LCD Display Back Panel (section detail)
to PC or Macintosh® back panel
When connecting a PC to the LCD
Television System, connect the PC directly
to the LCD display. Do not connect the PC
to the HD-6000.