Mitsubishi Electronics LT-4260 Flat Panel Television User Manual


 
29
Connecting a VCR directly to LCD Side Panel
Figure 1. Connecting the VCR Audio/Video.
NOTE: The LCD Display side panel connections shown below can only be used when the HD-6000 is not connected to
the LCD Display.


Composite Video with Audio or S-
Video with Audio (Recommended)
(Figure 1)
1.
Connect a video or a S-Video cable from VIDEO
OUT on the VCR back panel to VIDEO INPUT
on the LCD Display side panel.
2. Connect a set of audio cables from AUDIO OUT
on the VCR back panel to VIDEO INPUT/
AUDIO RIGHT & LEFT on the LCD Display
side panel.
• The red cable connects to the R (right) channel
• The white cable connects to the L (left) channel
























The Display Side Panel is shut-off
when the HD-6000 is connected to the
LCD Display using a HDMI™ cable.
Refer to Chapter 2 in the HD-6000
Owner’s Guide on how to connect A/V
equipment to the HD-6000. The HD-
6000 does not shutoff the PC INPUT.