Mitsubishi Electronics WD-62927 Projection Television User Manual


 
Chapter 4. Netcommand Functions 57
CableCARD™ Menu
Figure 4
Press HOME key to exit
Figure 4. Possible Device Menu for CableCARD
When viewing a CableCARD channel, pressing DEVICE
MENU will display a list of up to 8 links to applications
that contain basic CableCARD information made
available from your cable provider. Press ADJUST
or to move through the application links. To select a
link (blue text) to an application, press ADJUST or
to highlight the link, then press ENTER to access the
linked page. Pressing DEVICE MENU will return to the
CableCARD menu screen and pressing HOME will return
Device Menu
If the input is a VCR or DVD, and NetCommand is set up,
press DEVICE MENU once to display the transport menu
for the current device (figure 3). Press DEVICE MENU a
second time to display the menu for the current device
source, if available.
Figure 3. Transport menu
When used with the TV Guide On Screen, DEVICE MENU
displays or removes TV Guide’s menu information. See
the TV Guide On Screen Interactive Program Guide
User’s Manual for detailed information.
IR Controlled Devices
For a NetCommand compatible traditional IR controlled
device, pressing DEVICE MENU once or twice will display
the menu for that device. While the menu for the device
is displayed, press ADJUST and ENTER to
navigate the screen. For some NetCommand traditional
devices, you will also be able to use the number buttons
and other additional buttons on the TV remote. For
traditional DVD players, DEVICE MENU is also known as
the setup menu.
Using the Device Menu Button to Display Menus
to TV viewing. The screen shown is an example of the
type of screen that may display. Specific screen menus
are sent by your cable provider.
If there are technical problems with the CableCARD, an
error screen will automatically display with information
that may be needed by your Cable provider when you call
them for assistance.
Moving Through Other CableCARD Screens
In addition to CableCARD menus, other CableCARD
application screens may display and require you to make
additional selections. While CableCARD application
screens are customized in each area, some general rules
apply in using these screens on your Mitsubishi television.
1. Blue text denotes a link to another screen. Press
ENTER to move to the next application. When
screens do not have blue text, there are no more
links.
2. You cannot move backward through the links. If you
want to exit the CableCARD system, press HOME to
exit and return to TV viewing. CANCEL may not work
with some CableCARD screens.
All information on these application screens is provided
by your local cable company. Please contact your cable
provider if you have any problems with the application
screen displays.
IMPORTANT
Most CableCARD screens show only status
or diagnostic information and do not allow
you to make changes. These screens are
meaningful only to your local cable provider.