Filter
Top Products
45
45
There are more than 64 line intersections,
but the ashi ng br acket wi ll onl y st op at
the 64 adjustment points.
Setup Menu: Advanced Convergence, Transport Menu, and
Language
Advanced Convergence
(Figure 1)
After adjusting the Red Convergence and
Blue Convergence, you can ne- tune your
TV by adjusting the Red and Blue conver-
gence at 64 individual points. Move the
ashi ng br acket to a posi tion needi ng adj ust -
ment by pressing , , , or . Press
ENTER to select the position ( ashi ng wi ll
stop). Move the Red or Blue line by press-
ing , , , or . Press VIDEO to switch
between the Red and Blue lines. A
position is properly converged when all
three lines combine to appear white. Press
ENTER to deselect the position ( ashi ng
will resume), and move the brackets to the
next position needing adjustment. When
completed, press MENU or HOME to save
your changes, and exit the Advanced Con-
vergence screen. Press INFO for detailed
instructions and then press INFO or menu to
return to the convergence screen.
Press INFO for help
Part III: Setup
Advanced Convergence, Transport, and Language
Figure 1. Advanced Convergence screen
Language
(Figure 2)
Display the on-screen menus in either
English or Spanish (Español). The rst
time your TV was powered on, you were
requested to select an on-screen menu lan-
guage. When the radio button setting is
changed, the screen language changes con-
currently.
Transport Menu
(Figure 2)
The Transport Menu is used by NetCom-
mand™ to control VCRs, DVDs, IEEE 1394
AV Disc, digital VCRs, and similar devices.
This menu can be turned off if you would
rather not have it displayed. The transport
buttons on the remote control will continue
to operate. See the NetCommand Guide for
further details.
Figure 2. Setup menu (Transport menu selected)