Mitsubishi Electronics PD-4225S Flat Panel Television User Manual


 
26 Plasma TV
How to connect
1. To get the best picture quality, adjust the PC graphics card to a
640x480, 60Hz setting.
2. Use the TVs RGB INPUT port for video connections.
3. Then, make the corresponding audio connections. If using a
sound card, adjust the PC sound as required.
How to use
1. Turn on the PC and the TV.
2. Turn on the TV by pressing the POWER button on the TV's
remote control.
3. Use the DEVICE button on the remote control to select RGB.
4. Check the image on your TV. There may be noise in the PC mode
associated with the resolution, vertical pattern, contrast or bright-
ness. If noise is present, change the PC mode to another resolu-
tion, change the refresh rate to another rate or adjust the bright-
ness and contrast on the menu until the picture is clear. If the
refresh rate of the PC graphics card can not be changed, change
the PC graphics card or consult the manufacturer of the PC
graphics card.
NOTES: The MonitorLink Input is not intended for use with per-
sonal computers or devices generating video signals with
computers.
Avoid keeping a fixed image on the TV's screen for a long
period of time. The fixed image may become permanently
imprinted on the screen. Use the Orbiter screen saver
when possible.
The synchronization input form for Horizontal and Vertical
frequencies is separate.
The TV has a special signal output capability which allows you
to hook up a second TV or monitor.
Connect the second TV or monitor to the TV AV OUTPUT. See
the Operating Manual of the second TV or monitor for further
details regarding that devices input settings.
NOTE: Component, RGB-PC/DTV 480p/720p/1080i, S-video
input sources cannot be used for Monitor out.
PC Setup
PC Setup
- This TV provides Plug and Play capability, meaning that the PC adjusts automatically to its settings. The TV sends configuration
information (EDID) to the PC using the Video Electronics Standard Association (VESA) Display Data Channel (DDC) protocol.
Monitor Out Setup
Monitor Out Setup
FACTORY INSTALLED
CABLE
NOTE: Not all cables shown are included with the TV. They are available at most consumer electronics stores.