Mitsubishi Electronics PD-4225S Flat Panel Television User Manual


 
38 Plasma TV
1. Press the TV MENU button and then use
D
/
E
button to select the SCREEN menu.
2. Press the
G
button and then use
D
/
E
button to select Position.
3. Press the
G
button and then use
D
/
E
/
F
/
G
button to adjust the position.
4. Press the ENTER button to save.
SCREEN
Prev.
Auto Adjust
Format
Zoom in/out
Position
G
Manual Adjust
VCR Mode
Initialize
VGA Mode
SCREEN
MENU
SCREEN
Prev.
Auto Adjust
Format
Zoom in/out
Position
Manual Adjust
G
VCR Mode
Initialize
VGA Mode
SCREEN
MENU
Manual
Manual
Adjust (RGB-PC mode only)
Adjust (RGB-PC mode only)
Adjusting Horizontal/ V
Adjusting Horizontal/ V
ertical Position
ertical Position
- If the image still isnt clear after auto adjustment and especially if characters are still jittery, adjust the picture
Phase manually.
- To correct the screen size, adjust Clock.
- This function works in the following modes:
RGB-PC, RGB-DTV (480p,720p,1080i), DVI-DTV (480p,720p,1080i),
COMPONENT (480p,720p,1080i).
1. Press the TV MENU button and then use
D
/
E
button to select the SCREEN menu.
2. Press the
G
button and then use
D
/
E
button to select Manual Adjust.
3. Press the
G
button and then use
D
/
E
button to to select Phase or Clock.
4. Use the
F
/
G
button to make appropriate adjustments.
The Phase adjustment range is 0 ~ 31.
The Clock adjustment range is -50 ~ +50.
5. Press the ENTER button to save.
Phase 0
Clock 0
SCREEN
Prev.
Auto Adjust
Format
Zoom in/out
Position
Manual Adjust
VCR Mode
G
Initialize
YNR
SCREEN
MENU
VCR Mode (TV
VCR Mode (TV
, V
, V
ideo(Exp.), V
ideo(Exp.), V
ideo, S-V
ideo, S-V
ideo and Component 480i mode only)
ideo and Component 480i mode only)
- Use this function to correct jittering or picture instability while viewing a video tape.
1. Press the TV MENU button and then use
D
/
E
button to select the SCREEN menu.
2. Press the
G
button and then use
D
/
E
button to select VCR Mode.
3. Press the
G
button and then use
D
/
E
button to select Off or On.
Select the On option if watching a VCR.
Select the Off option for other equipment. (Except VCR)
4. Press the ENTER button to save.
Off
On
1. Press the MENU button and then use
D
/
E
button to select the SCREEN menu.
2. Press the
G
button and then use
D
/
E
button to select Initialize.
3. Press the
G
button.
You can reset Zoom in/out, Manual Adjust, Position, PIP size, PIP position and
sub picture size.
4. Press the HOME button to exit.
Initializing (Reset to original factory value)
Initializing (Reset to original factory value)
- This function operates in every mode.
- Use the Initialize option to reset the adjusted settings.
SCREEN
Prev.
Auto Adjust
Format
Zoom in/out
Position
Manual Adjust
VCR Mode
Initialize
G
YNR
To set
SCREEN
MENU
D
F
G
E