Filter
Top Products
Owner’s Manual 27
Resolution
640x350
720x400
640x480
848x480
852x480
Horizontal
Frequency(KHz)
31.468
37.861
31.469
37.927
31.469
35.000
37.861
37.500
43.269
31.500
35.00
37.500
31.500
35.000
37.500
70.09
85.08
70.08
85.03
59.94
66.66
72.80
75.00
85.00
60.00
70.00
75.00
60.00
70.00
75.00
35.156
37.879
48.077
46.875
53.674
49.725
48.363
56.476
60.023
54.348
63.995
67.500
68.681
60.000
63.981
56.25
60.31
72.18
75.00
85.06
74.55
60.00
70.06
75.02
60.05
70.01
75.00
75.06
60.00
60.02
Vertical
Frequency(Hz)
Resolution
800x600
832x624
1024x768
1152x864
1152x870
1280x1024
Horizontal
Frequency(KHz)
Vertical
Frequency(Hz)
1280x960
Monitor Display Specifications (RGB-PC Mode)
1. Connect a MonitorLink/DVI cable from the TV back
panel to the Mitsubishi HD Receiver/Controller back
panel.
2. Connect the MonitorLink Control/RS-232 cable from the
TV back panel to the Mitsubishi HD Receiver/Controller
back panel.
3. By using a Stereo Mini-plug to L and R RCA adapter,
connect the L (left) and R (right) audio cables from the
HD-5000 receiver/controller to the Audio Input Mini-plug
on the back of the TV.
IMPORTANT: Additional connection cables are not pro-
vided with the TV. They should be available
at most electronic stores.
NOTES: • The 29-pin MonitorLink/DVI and 9-pin RS-232
cables can be found at your local electronics
store. Please refer to www.mitsubishi-tv.com for
more information on RS-232C control.
• When MonitorLink is used as a DVI-HD input,
the terminal is compliant with EIA-861 standards
for extended and high definition video; however,
this input is not intended for use with personal
computers or devices generating video signals
with computer resolutions.
CAUTION: To assure continued FCC compliance, the
user must use a shielded video interface cable with
bonded ferrite cores at each end, when using the
MonitorLink/DVI input.
HD-5000/MONIT
HD-5000/MONIT
ORLINK SETUP
ORLINK SETUP
NOTE: Not all cables shown are included with the TV. They are available at most consumer electronics stores.