Filter
Top Products
29
Setting the signal and black level for DVI
signal
Choose the signal for the DVI connector (PC or STB/
DVD) and set the black level.
Example: Setting the “PLUG/PLAY” mode to “STB/
DVD”
1. On the MAIN MENU, select “OPTION2”, then press
the MENU/ENTER button.
The “OPTION2” screen appears.
2. Use the ▲ and ▼ buttons to select “DVI SET UP”,
then press the MENU/ENTER button.
The “DVI SET UP” screen appears.
3. To set PLUG/PLAY mode to “STB/DVD”...
Use the
ᮤ
and
ᮣ
buttons to select “STB/DVD”.
The mode switches as follows each time the
ᮤ
or
ᮣ
button is pressed:
PLUG/PLAY: PC ↔ STB/DVD
BLACK LEVEL: LOW ↔ HIGH
DVI SET UP
EXIT
PLUG/PLAY
BLACK LEVEL
: STB/DVD
: HIGH
SEL.
RETURN
ADJ.
Information
Ⅵ PLUG/PLAY settings
PC ..............When connected to the PC signal.
STB/DVD....When connected to the SET TOP BOX,
DVD etc.
Ⅵ BLACK LEVEL settings
LOW ...........When connected to the PC signal.
HIGH ..........When connected to the SET TOP BOX,
DVD etc. Change “HIGH” into “LOW”
if the black level appears gray.
Information
Ⅵ S1/S2 settings
AUTO .....Adjusts the screen size automatically
according to the S1/S2 video signal.
OFF ....... Turns the S1/S2 function off.
Ⅵ Restoring the factory default settings
Select “ALL RESET” under the OPTION1 menu. Note
that this also restores other settings to the factory
defaults.