Mitsubishi Electronics PD-6130 Flat Panel Television User Manual


 
Cleaning Safeguards
Plasma Display Screen & Cabinet
Please follow the cleaning safeguards listed below to prevent
damage to your Plasma Display and retain this document for
future reference.
IMPORTANT: No Abrasives!
DO NOT use any kind of abrasive cloth or cleaner
or ammonia on the Plasma Display’s screen or
cabinet.
Cleaning Your Plasma Display
Normally, light dusting with a dry, non-abrasive cloth will
clean your Plasma Display. If cleaning beyond this is needed,
please follow these guidelines:
First, turn off the Plasma Display and unplug the power cord
from the wall outlet before cleaning.
Cleaning the cabinet of your Plasma Display
Gently wipe down the Plasma Display with a soft, non-
abrasive cloth such as cotton flannel or a clean cloth diaper,
lightly moistened with water.
Dry with a second dry, soft, non-abrasive cloth.
General Cleaning Warnings:
DO NOT apply pressure to the Plasma Display’s screen.
DO NOT allow liquid to enter the Plasma Display through
the ventilation slots or any crevice.
DO NOT use any strong or abrasive cleaners because they
can scratch the screen and the cabinet.
DO NOT use any cleaners that contain ammonia, bleach,
alcohol, benzene, or thinners because they can damage and
dull the surfaces.
DO NOT scrub or rub the screen or cabinet. Wipe it gently.
IMPORTANT
For further information, assistance in operating
your Plasma Display or if you are in need of service,
please contact us at www.mitsubishi-tv.com or call
Consumer Relations at
800-332-2119