Filter
Top Products
Using the remote control to operate VCRs, cable
boxes and other components (cont,.)
If yourVCR
is this brand...
Mitsubishi (A)
Mitsubishi (B)
Canon
Emerson
Funai
General Electric
Gotdstar
Hitachi
JVC
...enterthis
code
01
02
03
04, 05
06
03
07
08
09
Ifyour VCR
is this brand...
Magnavox
Multitech
NEC
Panasonic
Philco
Philips
Quasar
RCA
Sanyo
...enterthis
code
03, 10, 11
06
12
03, 21
03, 10
03, 10, 11
03
08, 13,20
14
Ifyour VI
is this bral
Scot
Sharp_
Sony
Sylvania
S_ymphonic
Teknika
Toshiba
Totevision
Zenith
...enterthis
code
15
16
17,_!8
__ 03, 10_11 .__
06
04, 06
15
07
19
0 Release the POWER button.
O
Press the POWER button again. Your VCR should turn on.
If the VCR turns on, your remote control is ready to operate
your VCR. (See Using Your Remote Control to Operate Your
VCR in this chapter for remote control VCR functions.)
If your VCR does not turn on, repeat the instructions, trying each
code number listed for your brand of VCR. If none of these code
numbers work, try each number (01 through 21) individually.
using your remote control to operate your VCR
After you have set up your remote control for your particular brand
of VCR, you can use the remote to operate your VCR.
O Set the select switch on the remote control to the layer that you
set up to operate your VCR: VCR-A or DVD.
O Point the remote control at the VCR and press the desired
buttons.
If you are using a Mitsubishi VCR, you wil[ l:,e able to use all of the
buttons on the remote control to operate your VCR except for MUTE,
VOLUME and the PIP function buttons, which will always operate
the TV itself.
If you are using another brand of VCR, you can use the POWER,
CHANNEL, REC, STOP, PAUSE, REW, PLAY, and FF
buttons to operate your VCR.
42 Chapter 3: Operating Your TV