Filter
Top Products
_>Important:
Setting the timer
This special feature allows you to program the TV to turn on
automatically at a specific time to the channel that you set.
NOTE: The clock must be set prior to setting the timer.
[_"] TV Main Menu
[] First Time Setup
[] Customize Display
[] Advanced Features
[] Selecl A]V Memory
] ADJUST to select
ENTER to enter
MENU to exit menus
To set the timer::
0 Press the MENU button o]_ the
remote control. The Main
Menu will appear on the screen.
O Use the ADJUST buttons Lo
select "Adw_nced Features".
Press ENTEI:L
[] Advanced Features
[] Set the Timer
[] Use Parental Lock
[] Use 8uperQuickView
F_-'] ADJUST to select
ENTER to enter
MENU to go back
[] Set the Timer
[] Day : Sunday
[] Start time : - - : ....
r_ Antenna : --
[] Channel : --
_-7 ADJUST to select
ENTER to enter
MENU to go back
You will see the "Advanced
Features" screen. Use the
ADJUST buttons to select
"Set the Timer". Press
ENTER.
You will see the "Set the Timer"
screen. Press ENTER.
E> Important:
If you have not set the time, you
will be automatically routed to
the "Set the clock" menu.
Use the ADJUST buttons and
the ENTER button to set Day
(Mon-to-Fri, Everyday, Sun -
Sat), Start time, Antenna, and
Channel. _,
After setting the timer, the Program Timer indicator will blink in
green when the TV is turned off.
If you press the CANCEL button while setting the timer, the arrow
will move to the previous item. To clear the timer, press CANCEL
with the arrow next, to "Day".
When the timer turns the TV on, the display will flash. If you do
not press any remote control buttons within 5 miiautes after the TV
turns on, the TV will automatically turn off. P:ress a function
button (such as the display button) to keep the TV on and to turn
off the flashing display.
Using the Advanced Features 77