Mitsubishi Electronics WD-52725, WD-62525, WD-52525, WD-62725 Projection Television User Manual


 
32
33
Remote Control Functions: Overview
Overview
Figure 1, following page
1. Slide Switch: Selects A/V product to be
controlled by the remote control. Select TV for
NetCommand® device control.
2. Numbers: Individually selects channels or enters
information into menus.
3. POWER: Turns power on and off for TV and other
A/V products.
4. SQV (SuperQuickView™): Scans through
memorized lists of favorite channels.
5. QV (QuickView™): Switches between the current
channel and last channel viewed.
6. SUB/CANCEL: Clears SQV and some menu
entries and cancel recordings. For digital channels,
adds separator between major and sub channel
numbers.
7. DEVICE: Displays the Device Selection menu
to select the device to view (Ant-1 and Ant-2 or
devices connected to the TV’s inputs including
IEEE 1394 devices).
8. CHANNEL: Scrolls up or down through memorized
channels.
9. VOLUME: Changes sound level.
10. MUTE: Turns sound on or off.
11. TV MENU: Displays on-screen menu
system.
12. ADJUST: Press , , and to navigate
menus, change settings, and move the PIP on-
screen location. Operates many NetCommand®
functions.
13. ENTER: Selects a channel number or menu item.
14. GUIDE: Displays ChannelView for Ant-1 and 2.
Displays Track List for A/V Disc. Displays program
guide for satellite receiver, some cable boxes or
DVD Disc menu. Displays thumbnails or playlists
for media card files.
15. Light: Located on the right side of the remote
control, this feature illuminates buttons or labels.
16. DEVICE MENU: Displays menus for devices
connected to TV, including CableCARD™.
17. HOME: Exits TV on-screen menus and return to TV
viewing.
18. V-CHIP: Turns On or Off the V-Chip Lock.
19. INFO: Displays on-screen summary of the current
device used and any broadcast information
available (including current V-Chip information). See
Appendix D for details.
20. AUDIO: Selects and adjusts individual audio
settings.
21. VIDEO: Selects and adjusts individual video
settings.
22. PIP CH: Scrolls up or down through memorized
channels for PIP or POP.
23. PIP/POP: Cycles through PIP and POP display
choices.
24. EXCH: Exchanges PIP or POP and main TV picture.
25. SLEEP: Sets the TV to turn off within 2 hours. See
next page for setup instructions.
26. PIP DEVICE: Displays PIP Selection menu to select
the PIP or POP image source device
27. FORMAT: Changes the shape and size of the main
TV picture.
28. CONNECT: Initiates IEEE 1394 peer-to-peer
connections.
29. REC (Record): Records with a VCR, sets up
recordings for DVCR, IEEE 1394 devices or while in
ChannelView.
30. PAUSE: When no PIP or POP image is displayed,
freezes the main TV picture. When PIP or POP
image is visible, pauses that image. Pauses a VCR,
DVD or A/V Disc, media card file.
31. REW/REV: Rewinds or reverses search with a VCR,
reverses scan with a DVD, A/V Disc or media card
file.
32. PLAY: Plays a VCR, DVD, A/V Disc or media card
file.
33. STOP: Stops a VCR, DVD, A/V Disc or media card
file.
34. FF/FWD: Fast forward or forward search with a
VCR or media card file, or fast play a DVD.