Filter
Top Products
64
65
Antenna Menu
Figure 13
The Antenna Menu options are available for use with
analog and digital channels on Antenna-1 and Antenna-
2. You can memorize channels, add or delete channels,
name channels and add channels to an SQV (Super
Quick View™) list.
Memorize
For Antenna 1 (Main) or Antenna 2 (Aux)
Select either Air (when used with an indoor/outdoor
antenna) or Cable (when used with direct cable)
then press ENTER to start the automatic channel
memorization process. If a CableCARD™ is being
used, memorized channels are provided by your cable
provider through the CableCARD.
To stop the automatic channel memorization process,
press CANCEL. Channels memorized before you
pressed CANCEL are retained in memory.
After memorizing channels, the channels in the memory
can be accessed in ascending or descending order by
pressing CH or .
The memorization will occur twice, as the TV
memorizes analog and digital channels separately.
Prefer Digital
When a memorized channel is available as both analog
and digital, a check mark in the Prefer Digital box will
allow digital channels to display and analog channels to
be hidden (when using CH). Removing the checkmark
will show both analog and digital choices.
Antenna Menu
Channel
Channels can be changed in 3 ways:
1. By pressing ADJUST or to select the channel.
2. By pressing CH or for channels already in
memory.
3. Directly entering the number. With so many current
and potential channels, the number range is greatly
expanded. Channels can be one part, analog or
digital (up to the number 16383) or two part, for
digital channels (these use a separator). For a
two part digital channel, you may press SUB/
CANCEL on the remote to enter a separator after
the first, second or third number, depending on the
broadcaster’s channel information.
For digital channels, when the broadcaster has
sent a virtual channel number, the virtual channel
number is shown in the text box and the original
digital channel is shown below on-screen, as a
reference.
Memory
After the available channels have been memorized with
Memorize, weaker channels can be added. Unwanted
channels can also be deleted. Press CH or on
the remote control to see the channels in memory.
Press ADJUST or to select Added or Deleted for
the channel shown in the Channel number box.
Name
Analog channels shown on Antenna-1 or Antenna-2
can be named (up to four characters). After you enter
a name, it will appear on the TV screen, next to the
channel number.
1. Press ADJUST or to select each letter.
2. Press ENTER to set the letter and move to the
next letter position.
3. Press CANCEL to move back one position.
Digital channels are automatically named if the
broadcaster sends the information.
Figure 13. Antenna Menu