Filter
Top Products
66 5. NetCommand IR Control (838 Series)
For assistance call 1(800) 332-2119
Operating NetCommand-Controlled Devices, continued
Key Name in
Learning Screen
Special Operation Description and Setup How to Use
Menu Displaying a Menu for the Current Device
“Learn” the
MENU
key on the original remote in the
Menu learning position.
Press
TOOLS
and number
3
to send the menu
signal to the device.
Guide Displaying the On-Screen Program Guide
(cable box or satellite receiver)
“Learn” the 1.
GUIDE
key on the original remote in
the Guide learning position.
Learn the 2.
PAGE
UP
and
PAGE
DOWN
keys of the
original remote in the Page Up and Page
Down learning positions.
While watching the device, press 1.
GUIDE
to
display the guide.
Press 2.
CH/PAGE
to send the Page Up/Dn com-
mands for the guide.
Enter ENTER-Key Functions (cable boxes, satellite receivers, etc.)
Some devices have two keys that have “enter” functions. One key is for menus and is often labelled
SELECT
or
OK
. A second key is for use with number keys for direct channel selection. NetCommand
uses the same
ENTER
key for both operations.
When
ENTER
has a menu or guide function or
when the original remote control uses the same
key for menus and channel selection:
Learn the
ENTER
,
SELECT,
or
OK
key in the
NetCommand Enter learning position.
Press 1.
MENU
or
GUIDE
to display the device’s
menu or guide.
Press 2.
ENTER
within the menu and
NetCommand will send the Enter signal for
menus.
Enter (digits)
When
ENTER
is for channel changes, i.e., the origi-
nal remote control has a separate
ENTER
key for
this function):
Learn the
ENTER
key for channel selection in
the NetCommand Enter (digits) learning posi-
tion. Use this learning position only if the original
remote control has separate keys for Enter in
menus and Enter for channel selection.
Press digit key(s) and then press
ENTER
.
NetCommand will send the Enter signal for
channel selection.
Cancel CANCEL as the Cancel or Exit Function
“Learn” the Cancel or Exit function in the
NetCommand Cancel learning position
Press 1.
MENU
or
GUIDE
to display the menu or
guide.
Press 2.
CANCEL
and NetCommand will send
the Cancel or Exit signal.
—
(separator)
The symbol “—” can serve as the separator
between a digital channel’s main and sub-channel
digits, e.g., digital channel 12-1 (main channel is
12, sub-channel is 1).
“Learn” the channel separator function in the
NetCommand – (separator) learning position.
Press digit key(s) and press
CANCEL
.
NetCommand will send the channel-separator
signal.
Downloaded From TV-Manual.com Manuals