Filter
Top Products
5. PROGRAMMING MELSEC-A
5-12
5.5 Program Example for Use of the ACPU/QCPU (A mode) (dedicated
instructions)
A sequence program is used to set the network and automatic refresh parameters.
(1) Program example
*Setting of network parameters using RLPA dedicated instruction
*Setting of automatic refresh parameters using RRPA dedicated instruction
Synchronization mode:
invalid
Number of connected
modules:1
AJ65BT-64DAV station
information (remote device
station, 2 stations occupied
,
station No.1)
Dedicated instruction
(RLPA)
Starting I/O number of
master module
Parameter storage
starting device
Device which turns on 1
scan at completion
Reads parameter status
at abnormal completion