Filter
Top Products
GB 22
Antenna Configuration and Channel Search
The “Antenna Configuration” line will bring you to the “Antenna
Configuration Set-up” menu. The settings for this menu are al-
ready described on page 14.
If you select “Channel Search”, you can choose between the
“Channel Search set up” described on page 15, SMATV de-
scribed on page 15, and “Advanced Channel Search” described
below.
Installation
Select this Menu from the line “Installation” in the Main Menu.
The submenu will give you the opportunity to change the prefer-
ences performed during first time installation. You can also add
features that were not included from the first time installation.
Please note that helpful information for every line is given at the
end of the menu.
Installation Submenus
Advanced Channel Search
The information to enter in this menu is available in magazines
covering satellite TV reception, or from your Service Provider.
Antenna Configuration Name: Select the satellite from which
the signal is to be received.
Transponder Frequency: Enter using the number buttons on the
remote control.
Polarization: Select Horizontal, Vertical or Auto.
Symbol Rate: Select “Auto” or enter with the number buttons.
FEC: Enter the appropriate Forward Error Correction (FEC) value.
If the PID’s are not described in the transmission you can enter
them here by disable AUTO when pressing the left/right (
)
buttons on the remote control on any PID row. If these buttons
are pressed when PID’s are in the transmission, the selected
PID’s can be seen.
PID Video:Enter the PID (Package Identifier) for the video signal.
PID Audio: Enter the PID for the audio signal.
PID PCR: Enter the PID for the PCR (Programme Clock Refer-
ence).