Filter
Top Products
28
ST_START Starts a switch test
ST_OPEN? Returns pressure value at which the switch opened
ST_CLOSE? Returns pressure value at which the switch closed
ST_DEAD? Returns pressure value of the deadband of the switch
VAL? Returns the measured values
ZERO_MEAS Zeros the pressure module
ZERO_MEAS? Returns the zero offset of the pressure module
Table 7: Parameter units
Units Meaning
MA milliamps of current
V Voltage in volts
PSI Pressure in pounds per square-inch
INH2O4C Pressure in inches of water at 4°C
INH2O20C Pressure in inches of water at 20°C
CMH2O4C Pressure in centimeters of water at 4°C
CMH2O20C Pressure in centimeters of water at 20°C
BAR Pressure in bars
MBAR Pressure in millibars
KPAL Pressure in kiloPascals
INHG Pressure in inches of mercury at 0°C
MMHG Pressure in millimeters of mercury at 0°C
KG/CM2 Pressure in kilograms per square-centimeter
ON Turn something on
OFF Turn something off
UPPER Upper Display
MIDDLE Middle Display
LOWER Lower Display
DCI Current measure function
DCI_LOOP Current measure function with loop power
DCV Voltage measure function
P1 Port P1 pressure measure function
P1_ST Switch Test with port P1 pressure measure function