Filter
Top Products
PROGRAMMING DEVICE CONTROL
(continued)
6. Repeat steps 1 through 5 (on the previous
page) for each device you want to control.
For future reference,write down each
working device code in the following boxes:
TV Code:
PVR Code:
DVD Code:
CBL/SAT Code:
AUD Code:
VCR Code:
PROGRAMMING DVD PLAYER/VCR
COMBO CONTROL
1. Turn on the DVD Player/VCR Combo and
insert a DVD.
NOTE:Please read steps 2 through 4 completely
before proceeding. Highlight or write down the
codes and device you wish to program before
starting step 2.
2. On the remote control,press DVD.Next,
press and hold
SET until the LED (red light)
blinks twice,then release
SET.
3. Use the Setup Codes For DVD Player/VCR
Combos (on page 21) to locate the brand
name and then enter the first four-digit
code for your device.If performed
correctly,the
LED will blink twice.
NOTE: If the LED did not blink twice,repeat steps
2 through 4 and enter the same code again.
4. Aim the remote control at the device and
press
POWER once. It should turn off.If it
does not,repeat steps 2 through 4,trying
each code for your brand until you find one
that works.If it still does not work,try
Searching For Your Code on the next page.
NOTE:If the device does not have a POWER
key, press the (Play) key.
10
OFA 6 PVR 2/15/03 9:25 AM Page 10