Filter
Top Products
5
Key Charts
When the LED (red light) blinks,the
remote control is working and (after
programming) is sending signals.
Press
TV,PVR,DVD,CBL/SAT,AUD,
or
VCR once to select a desired
home entertainment device
to control.Also see the Device Table
on page 7.
Press
POWER once to turn on or off
the selected device.For master
power control,see Programming
Master Power on page 12.
Press
MENU once to display your
selected device’s main menu.For
PVRs,use PVR Menu.
Use
INFO to display the current
channel and program information.
Use
GUIDE to display your selected
device’s program guide or setup
menu.
Use
EXIT to exit from your selected
device’s guide or menu.
Use the cursor keys to move the
cursor in the program guide and
menu screens.
Use
SELECT to choose options from
your selected device’s menu or guide.
In the AUD mode,use SELECT to set
the surround sound.Use
▲ (or ▼)
to adjust the volume higher (or
lower).Use (or ) to adjust the
balance left (or right).
Use
VOL+ (or VOL-) to raise (or
lower) the sound volume.
Use CH+ (or CH-) to select the next
higher (or lower) channel.
Press Mute once to turn the sound
off or on.
Use to command your PVR to
instantly replay the last 7 seconds
of a program you are viewing.
continued on next page...
▲
▲
OFA 6 PVR 2/15/03 9:25 AM Page 5