22
Connecting the Power/Turning on the DV-L55
Before connecting
• Make sure that all the connections on pages 16 – 21
are complete (the connection to a TV is required).
ON STANDBY
PLAY
MODE
DISPLAY
DIMMER
MENU
SETUP
TOP MENU
RETURN
AUDIO ANGLE SUBTITLE ZOOM
RC-574DV
CLEAR
OPEN/
CLOSE
ENTER
123
6
789
0
45
ON
STANDBY
/
ON
STANDBY
DISPLAY
STANDBY/ON
1
Plug the supplied power cord into
the AC INLET and then into the
power outlet on the wall.
• Do not use a power cord other than the
one supplied with the DV-L55. The
power cord supplied is designed for
use with the DV-L55 and should not be
used with any other device.
•Never have the power cord discon-
nected from the DV-L55 while the
other end is plugged into the wall out-
let. Doing so may cause an electric
shock. Always connect by plugging
into the wall outlet last and disconnect
by unplugging from the wall outlet
first.
2
Press STANDBY/ON on the DV-L55
or ON on the remote controller.
The DVD Player turns on and the
STANDBY indicator turns off.
•To put the DV-L55 in the standby
mode, press STANDBY/ON on the
DV-L55, or STANDBY on the remote
controller. Be sure to set the volume to
minimum before putting the DV-L55
in the standby mode for the next use to
avoid sudden loud sound reproduction.
• Setting the STANDBY/ON button to
standby does not shut off the power
completely.
Screen saver and Auto power off
This player features a screen saver and an auto power
off function. If the player is stopped and no button is
pressed for five minutes, the screen saver starts. If the
disc tray is closed but no disc is playing and no control
is pressed for 30 minutes, the player automatically
goes into standby.
To a wall
outlet
STANDBY
/
ON
ON
Remote
controller
DV-L55_En.book Page 22 Friday, May 28, 2004 12:02PM