Filter
Top Products
7
Step 1:
Connections
Connecting a subwoofer with built-in power
amplifier
The maximum four units of two systems of subwoofer
with built-in power amplifier can be connected to this unit.
Use the SW1/2 PRE OUT RCA jack or SUBWOOFER 1/2
PRE OUT XLR jack according to the input jack of your
subwoofer. You can also set the level and distance of the
connected subwoofer.
r If your subwoofer does not have built-in power amplifier,
you can connect a power amplifier between the unit and
the subwoofer.
Connection to the PRE OUT RCA jack
Connect the RCA input jack of your subwoofer and the
SW1/2 PRE OUT RCA jack of the unit with an RCA cable.
Subwoofer with built-in
power amplifier
r If you use one subwoofer system only, connect it to the
SW1 PRE OUT RCA jack.
Connection to the PRE OUT XLR jack
Connect the XLR balanced input jack of your subwoofer and
the SUBWOOFER 1/2 PRE OUT XLR jack of the unit with
an XLR balanced cable.
Subwoofer
with built-
in power
amplifier
r If you use one subwoofer system only, connect it to the
SUBWOOFER 1 PRE OUT XLR jack.
Connecting the multichannel power amplifier
to the PRE OUT XLR jack
Connect the multichannel power amplifier to the PRE OUT
XLR jack. Connect the unit and power amplifier with an
XLR balanced cable.
r Refer to the position indication for connection on the right
of the PRE OUT XLR jack.
PUSHPUSH PUSHPUSH
$
Center
H
Height2 R/
J
Wide R
G
Height2 L/
I
Wide L
#
Front R
&
Surround R
F
Height1 R
"
Front L
7
Surround
back L
8
Surround
back R
%
Surround L
9
Height1 L
XLR balanced cable