Filter
Top Products
18
CHANGING THE FUSE
If the TV/radio/cassette stops working
properly while using vehicle battery
power, follow these steps to check the
DC power cord’s 2 amp fuse. If the fuse
needs replacing, use only a fast-acting
2-amp fuse, such as RadioShack Cat.
No. 270-1007.
Caution:
Do not use a fuse with a differ-
ent rating.
1. Unscrew the knurled ring and check
the fuse in the DC power cord.
2. If the fuse is bad, replace it.
3. Replace the knurled ring and tighten
it securely.
THE FCC WANTS YOU TO
KNOW
This TV/radio/cassette complies with the
limits for a Class B digital device as
specified in Part 15 of
FCC Rules
.
These limits provide reasonable protec-
tion against radio and TV interference in
a residential area. However, your TV
might cause TV or radio interference
even when it is operating properly. To
eliminate interference, you can try one
or more of the following corrective mea-
sures:
• Reorient or relocate the receiving
antenna.
• Move your TV/radio/cassette away
from the TV or radio receiving the
interference.
• Connect your TV/radio/cassette to
an outlet on a different electrical cir-
cuit than the TV or radio receiving
the interference.
• Consult your local RadioShack store
for assistance.
If you can not eliminate the interference,
the FCC requires that you stop using
your TV/radio/cassette.
illus of disassembled fuse
holder with knurled ring,
fuse visible
16-132.fm Page 18 Tuesday, July 20, 1999 8:46 AM