6
USING AC POWER
To use AC power, connect the supplied
AC adapter to the
DC: 12
~
15V
jack on
the back of TV/radio/cassette. Then plug
the other end into a standard AC outlet.
When you connect the AC adapter, the
batteries automatically disconnect.
Cautions:
• The supplied AC adapter supplies
12 volts DC, delivers 1300 milli-
amps, and has a center positive
plug which properly fits the TV/radio/
cassette’s
DC: 12
~
15V
jack. Using
an adapter that does not meet these
specifications could damage the TV/
radio/cassette or the adapter.
• Always unplug the AC adapter from
the AC outlet before you unplug it
from the TV/radio/cassette.
USING VEHICLE BATTERY
POWER
Follow these steps to power the TV/ra-
dio/cassette from your vehicle’s ciga-
rette-lighter socket using the supplied
DC power cord.
1. Make sure the supplied DC power
cord’s knurled ring is screwed firmly
onto its plug.
2. Plug the small end of the supplied
DC power cord into the
DC 12-15V
jack on the back of the TV/radio/
cassette.
Cautions:
• The supplied DC power cord sup-
plies 12 volts DC, delivers 1300
milliamps, and has a center posi-
tive plug that properly fits the TV/
radio/cassette’s
DC 12-15V
jack.
Using a power cord that does not
meet these specifications could
damage the TV/radio/cassette or
the power cord.
illus of DC 12-15V location
and connection to
AC outlet
illus of DC power cord
plug w/knurled ring
illus of DC 12-15V location
16-132.fm Page 6 Tuesday, July 20, 1999 8:46 AM