Filter
Top Products
13
CAMCORDER CONNECTIONS
Your VCR has jacks on its front panel that let you easily connect a camcorder or other video
source. You can also connect a camcorder to the
AUDIO
IN
1/VIDEO
IN
1
(Model 114) or
R-AUDIO-L
IN 1/VIDEO IN 1
(Model 63) jacks on the back of the VCR.
The Model 63 needs a stereo audio/video cable for this connection. The Model 114 needs an au-
dio/video cable for this connection. Your audio/video cable (not supplied) must have plugs that fit
the VCR’s jacks and the camcorder’s jacks for this connection.
1. Insert the plugs at one end of the cable into the
AV 2 L-AUDIO IN-R
and
AV
VIDEO IN
jacks on
the Model 63’s front panel, or the
AUDIO IN/VIDEO IN
jacks on the Model 114’s front panel.
2. Insert the plugs at the other end of the cable into the AUDIO/VIDEO OUT jacks on your cam-
corder or other video source. Be sure to connect VIDEO to VIDEO and AUDIO to AUDIO (use
the plug’s color codes as a guide).
CONNECTING POWER
To power the VCR, plug its power cord into a standard AC outlet. --:-- appears on the display.
Note:
The VCR prompts you to select a language, connection type, and output channel, then
starts to search for a channel that
has an Extended Data Service (EDS) signal (see “Initial Setup”
on Page 15) when:
• You plug in the VCR for the first time then press
POWER
to turn it on.
• You unplug the VCR and reconnect it (within 24 hours) or after a power failure (of less than 24
hours) then press
POWER
to turn it on.
• You reset the VCR’s memory (see “Resetting the VCR’s Memory” on Page 20).
REWIND
STOP
EJECT
PLAY
FAST-F
CHANNEL
RECORD/TIME
POWER
TV/VCR
VIDEO IN L – AUDIO IN – R
AV 2
16-551.fm Page 13 Tuesday, July 20, 1999 5:13 PM