Filter
Top Products
41
DUBBING
The process of recording from one audio/video
device to another is called dubbing.
An audio/video device where a signal origi-
nates is called the dubbing source. You can
use another VCR, camcorder, satellite receiv-
er, or other device with A/V outputs as the dub-
bing source, connect the dubbing source and
the VCR, then use your VCR to record the sig-
nal from the dubbing source. Or, you can use
this VCR as the dubbing source for another
VCR. See “Installation” on Page 9 for the vari-
ous possible connections.
Note:
Always use video-quality shielded ca-
bles with phono-type connectors to connect the
device to the VCR. Do not use standard audio
patch cords.
Important:
Most material performed in public,
such as concerts, plays, and movies, or distrib-
uted on prerecorded video tapes is copyright-
ed. The unauthorized recording or duplication
of copyrighted material is a violation of the
copyright laws of most countries and such du-
plication may result in fines, imprisonment, or
both. Note, however, that in the United States,
it is not a violation of U.S. copyright laws for a
consumer to record a broadcast television pro-
gram for private (in-home) viewing.
To dub a tape, start playback on the dubbing
source first (see that device’s instructions) then
start recording on the recording VCR.
AUDIO-ONLY RECORDING
(MODEL 63 ONLY)
Because of the superior quality of VHS Hi-Fi
audio recordings, you might want to use your
VCR as an audio-only recorder. You can also
make live recordings by connecting a pre-
amplifier or mixer to the VCR’s
AUDIO IN
jacks.
Simply select the line input and record as usu-
al.
Caution:
Do not directly connect a microphone
to the VCR.
Note:
For the best audio fidelity, we recom-
mend you use high-quality video tape (such as
Cat. No. 44-465) to make audio-only record-
ings.
16-551.fm Page 41 Tuesday, July 20, 1999 5:13 PM