Optimus 63 VCR User Manual


 
16
Notes:
The output channel number for most
cable boxes and DSS receivers is usu-
ally 3 or 4. Check the owner’s manual
for your cable box or DSS receiver if you
are not sure what the output channel
number is.
If you are using the audio/video jack
connections to your cable box or DSS
receiver, select
VIDEO
OUT
as the out-
put channel.
6. When the following appears on the TV
screen, set your cable box or DSS receiver
to the local PBS station, then press
CH
s
.
(If you do not have a cable box or DSS
receiver, simply press
CH
s
.)
After you press
CH
s
,
CH
AUTO
SET PRO-
CEEDING
and the current channel number
appear on the TV screen as the VCR scans
through the channels and memorizes all
active channels in your area.
Note: If you have already set the channels
and just want to manually set the clock,
press
MENU
to skip tuner programming.
Then see “Manually Setting the Clock.”
7. When the VCR finishes scanning and stor-
ing channels, it searches for an EDS signal
and shows the following on the TV screen:
It takes up to 10 minutes for the VCR to set
the clock using the EDS signal. If the VCR
finds a signal, it automatically sets its clock
to the correct time and
AUTO
CLOCK
SET
COMPLETED
appears. If the VCR does not
detect a signal within this time,
AUTO
CLOCK
SET
INCOMPLETE
appears.
There is probably not an EDS signal avail-
able in your area. Press
STOP
, then see
“Manually Setting the Clock” to set the
clock.
Notes:
Your VCR protects tuner programming for
up to 24 hours in case a power failure
occurs or if the power cord becomes
unplugged. After about 24 hours without
power, the VCR loses the programming.
If you have not connected the VCR to an
antenna, cable box, DSS receiver, or
other signal source through the
IN FROM
ANT.
jack, the VCR does not store any
channel in memory. Instead, you see:
Manually Setting the Clock
Follow these steps to set the VCR to not
search for an EDS signal then to manually set
the clock.
Notes:
The clock must be accurately set for proper
automatic timer recording. We suggest you
refer to a radio station or time/temperature
service for the correct time.
If you do not press a button within 5 min-
utes in Steps 2–9, the clock is not set. Start
again from Step 1.
A
UT
O
SET
A
CABLE
THE
N
.
.
.
A
CABLE
Y
OU
R
H
U
P
K
E
Y
AUTO CLOCK SET
PROCEEDING
CANCEL: PUSH STOP KEY
PLEASE CHECK ANTENNA
CABLE CONNECTION THEN
PUSH VCR CH UP KEY AGAIN
NO CH FOUND
16-551.fm Page 16 Tuesday, July 20, 1999 5:13 PM