40
Monitoring an Automatic Timer
Recording
1. Turn on the TV and set it to the same chan-
nel as
3 CH. 4
on the back of the VCR.
Note:
If you are using a TV/monitor that is
connected to the VCR’s
R-AUDIO-L/VIDEO
OUT
jacks, set the TV/monitor to the video
mode.
2. Press
TV/VCR
until VCR appears.
Checking/Changing Timers
1. Turn on the TV and set it to the same chan-
nel as
3 CH. 4
on the back of the VCR.
Note:
If you are using a TV/monitor that is
connected to the VCR’s
R-AUDIO-L/VIDEO
OUT
jacks, set the TV/monitor to the video
mode.
2. Turn on the VCR and repeatedly press
TV/
VCR
until VCR appears.
3. Press
PROG
. You see the set program
menu.
4. Repeatedly press
PLAY
or
STOP
to select
TIMER
PROGRAM
, then press
FF
. The first
four timer settings appear.
5. Repeatedly press
PLAY
or
STOP
to select
the setting you want to change, then press
FF
.
6. Follow Steps 9–13 under “Setting a Timer”
on Page 38 to correct the selected setting.
7. When you finish, press
PROG
again, then
turn off the VCR.
Clearing a Timer
If the timer recording has not yet started:
1. Turn on the TV and set it to the same chan-
nel as
3 CH. 4
on the back of the VCR.
Note:
If you are using a TV/monitor that is
connected to the VCR’s
R-AUDIO-L/VIDEO
OUT
jacks, set the TV/monitor to the video
mode.
2. Turn on the VCR and repeatedly press
TV/
VCR
until VCR appears.
3. Press
PROG
. You see the set program
menu.
4. Repeatedly press
PLAY
or
STOP
to select
TIMER
PROGRAM
, then press
FF
. The first
four timer settings appear.
5. Repeatedly press
PLAY
or
STOP
to select
the setting you want to clear, then press
ADD/DLT
.
6. When you finish clearing the timer, press
PROG
.
Turn off the VCR if you still have at least one
timer setting entered.
If a timer recording is in progress:
1. Press
POWER
to stop timer recording.
TO
CANCEL
TIMER
REC
PUSH
POWER
THEN
STOP
KEY
appears if you are
watching the signal from the VCR.
2. Within 10 seconds, press
POWER
then
press
STOP
. TIMER disappears.
2:00
A
08 SP
S
TOP CH SPD
2:00
A
08 SP
STOP CH SPD
16-551.fm Page 40 Tuesday, July 20, 1999 5:13 PM