Optimus 63 VCR User Manual


 
43
PROBLEM POSSIBLE SOLUTION
Remote control buttons do
not work when the power is
on and a cassette is loaded.
Something is blocking the path from the remote control to the
VCR.
Bright light is shining on the VCR’s remote control sensor window.
Block the source of the light, get closer to the VCR, or change the
VCR’s location.
The remote control might be set for another device’s operation.
Press
VCR
then try again.
The remote control’s batteries might be weak. Replace the batter-
ies.
Cannot see broadcast TV
programs using the VCR’s
tuner.
TV/VCR
is not set correctly. Repeatedly press
TV/VCR
until VCR
appears.
Audio/video connections are incorrect. Check all connections.
Cannot record from the input
jacks.
Connections are incorrect. Check all connections.
INPUT
is not set correctly. Select
LINE1
or
LINE2
.
No stereo sound for a stereo
recording (Model 63 only).
You have not connected the VCR’s
AUDIO
OUT
jacks to a stereo
system or stereo TV. Connect the jacks to a stereo output.
The audio out setting is not correctly set. Set it to
Hi-Fi
— see
“Receiving/Recording Stereo/SAP Broadcasts (Model 63 Only)”
on Page 33.
The VCR might not have adjusted the tracking correctly. You
might need to manually adjust tracking (see “Tracking” on
Page 26).
16-551.fm Page 43 Tuesday, July 20, 1999 5:13 PM