Palsonic TFTV81HDT Flat Panel Television User Manual


 
BACK OF THE TV SET
PC
Connection
16
1. Adjust PC resolution to available resolution in LCD TV.
2. Connect between PC and TV set using the D-Sub and Audio cable like below the picture.
3. Turn on the PC and TV set.
4. select PC mode by pressing "HDMI/PC" button on the remote control or " " button of the TV set.
1. Adjust PC resolution to available resolution in LCD TV.
2. Connect between PC and TV set using the HDMI and Audio cable like below the picture.
3. Turn on the PC and TV set.
4. select HDMI mode by pressing "HDMI/PC" button on the remote control or " " button of the TV set.
BACK OF THE TV SET
When connecting with PC (D-Sub) cable.
When connecting with a HDMI cable.
Note: If the graphic card of the PC only supports a DVI signal, you must connect the Audio cable
like above the picture.