Filter
Top Products
26
Audio split editing
SD955A
$ Duration display
The duration can be indicated on the display panel
only.
Between the video IN and OUT points:
Press the IN button and OUT button at the same
time.
Between the audio IN and OUT points:
Press the A IN button and A OUT button at the
same time.
Match frame processing system
When two VTRs are used to perform the audio split
editing operations, there will be a total of 8 edit
points: the video IN and OUT points for the player,
the video IN and OUT points for the recorder, the
audio IN and OUT points for the player, and the
audio IN and OUT points for the recorder.
When five of the eight edit points are registered, the
remaining three points are automatically calculated
so only five of the edit points need to be registered.
$ When a VTR not equipped with the split
editing function is used as the player
When a VTR that cannot set the video and audio
edit points independently is used as the player, split
editing is still possible by setting the audio IN point
and OUT point in the recorder and setting the data
of three points as the video edit points.
<Note>
If, during audio split editing, the video OUT point (or
audio OUT point) only is registered without the
audio OUT (or video OUT point) having been
registered and automatic editing is then executed,
either the audio OUT point (or video OUT point) will
be registered or editing will continue until the STOP
button is pressed to suspend the editing operation.