Filter
Top Products
34
Setup menus
The underlined items indicates the initial setting.
USER menu
<BASIC>
No./Item Description
000
P-ROLL TIME
This sets the preroll time.
The preroll time can be set from 0 to 15 seconds
in 1-second increments.
0000 0s
::
0005 5s
::
0015 15s
001
LOCAL ENA
This selects the buttons which can be operated
on the front panel when the CONTROL switch
has been set to REMOTE.
0000 DIS
:
No buttons can be operated.
0001 ST&EJ
:
Only the STOP and EJECT buttons can be
operated.
0002 ENA
:
AJ-SD955A:All buttons except for the
RECORDER and PLAYER
buttons can be operated.
AJ-SD930: All buttons can be operated.
002
TAPE TIMER
This selects the 12 or 24 hour display for the
CTL counter.
0000 ±12h
: 12 hour display
0001 24h
: 24 hour display
006
SYNCHRONIZE
SD955A
This selects whether or not to synchronize
between two VTRs.
0000 OFF
:
No synchronization. The editing points deviate
several frames, but editing can be started
quickly.
0001 ON
:
Synchronization. Allows for error-free editing.
003
REMAIN SEL
This selects whether the remaining tape time
and total tape length are to be displayed in the
superimposed display of the VIDEO OUT 3/
SDI OUT 3 connector signals.
0000 OFF
: No display.
0001
2L
:
The remaining tape time is displayed on the
second line.
0002 1L
:
The remaining tape time is displayed on the
first line.
0003 R/TTL
:
The remaining tape time is displayed on the
first line, and the total tape length is displayed
in the second line.
<Notes>
OWhen “2L” is selected, the remaining tape time
is not displayed if “TIME” has been selected as
the setup menu item No.008 (DISPLAY SEL)
setting.
OWhen “R/TTL” is selected, the total tape length
is not displayed if “TIME” has been selected as
the setup menu item No.008 (DISPLAY SEL)
setting.
008
DISPLAY SEL
This selects what information is to be
provided by the time code and other super
displays output to the VIDEO OUT 3/SDI OUT 3
connector.
0000 TIME
: Data only.
(The data indicates the value for whichever of
CTL, TC or UB currently selected by the
COUNTER button.)
0001
T&STA
: Data and operation status.
0002 T&S&M
: Data, operation status and
mode.
0003 T&RT
: Data and REC TIME
0004 T&YMD
:
Data and REC DATE (year/month/day)
0005 T&MDY
:
Data and REC DATE (month/day/year)
0006 T&DMY
:
Data and REC DATE (day/month/year)
0007 T&UB
:
Data and user’s bit.
However, when UB has been selected with the
COUNTER button, the time code is displayed
after the user’s bit.
0008 T&CTL
:
Data and CTL data.
However, when CTL has been selected with
the COUNTER button, the time code is
displayed after the CTL data.
0009 T&T
:
Data and time code.
<Notes>
OMode display:
DVCPRO 50 (50 Mbps) = DVCPRO_50,
DVCPRO (25 Mbps) = DVCPRO,
DV = DV, DVCAM = DVCAM
OAn error message appears if a warning or error
has occurred when “T&S&M” has been
selected as this setting.
OREC TIME and REC DATE are displayed
during DV/DVCAM, playback only. With the
DVCPRO50 (50 Mbps) or DVCPRO (25 Mbps)
format, the operating mode is displayed.
No./Item Description
<Note>
When the automatic editing
mode [PREVIEW, AUTO EDIT]
is set, the unit will not operate if
the preroll time is set to 0
seconds.