Panasonic AJ-D250P VCR User Manual


 
[STX] QLH:m [ETX]
Parameters
m = D: Cumulative drum rotation
time
T: Cumulative capstan rotation
time
No parameter:
Cumulative drum rotation
time (4 digits)
[STX] LHRdata [ETX]
data = mhhhhh
m = D: Drum
T: Capstan
hhhhh = 00000
99999:
Cumulative rotation time
O
With no parameter
The drum’s cumulative rotation time
is returned as a 4-digit value.
data = hhhh
hhhh = 0000
9999:
Cumulative rotation time
Queries the current value of the hours meter.
[STX] QOT [ETX] [STX] OTEm [ETX]
m = E:
E-E (Electric modulation to Electric
play back)
m = T:
V-V (VTR to VTR recording)
Queries whether to set to the E-E output or V-V output
when the VTR is in the STOP mode, FF mode or REW
mode.
58
RS-232C
$
Query control commands
Sends data of computer Return data from VTR Description of command
[STX] QIE [ETX] [STX] IEVdata [ETX]
data = m1m2
m1 = 0
F: Designates the data of bit 7
to bit 4.
m2 = 0 F: Designates the data of bit 3
to bit 0.
Queries the forced E-E output setting.
Parameter m1 (HEX display) m2 (HEX display)
Bits supported BIT7 BIT6 BIT5 BIT4 BIT3
Switching data 0000AUDIO CH1
BIT2
AUDIO CH2
BIT1
VIDEO
BIT0
TC