Filter
Top Products
63
RS-232C
$
Query control commands
Sends data of computer Return data from VTR Description of command
[STX] QSP:m [ETX]
Parameters
m =
B: BEGIN point
E: END point
[STX] SMPdata [ETX]
data = pw:ghmmssff
O
When CTL data is to be used as
the reference
pw = BP: BEGIN point
EP: END point
g = Blank: With a positive value
– sign: With a negative value
h = 0
9: Hours
mm = 00 59: Minutes
ss = 00 59: Seconds
ff = 00 29: Frames
O
When TC data is to be used as the
reference
pw = BP: BEGIN point
EP: END point
gh = 00 23: Hours
mm = 00 59: Minutes
ss = 00 59: Seconds
ff = 00 29: Frames
Queries the repeat position which has been stored in the
memory.
Error code ER001 is returned from the VTR when the data
has not been entered.
[STX] QTT [ETX] [STX] TSTdata [ETX]
data = mmmm
mmmm =
0000: 0.5 sec.
0005: 5 sec.
0010: 10 sec.
0030: 30 sec.
0100: 1 min.
0200: 2 min.
Queries the standby OFF timer which has been stored in
the memory.
[STX] QVI [ETX] [STX] VIm [ETX]
m = L: LINE
S: S-VIDEO
D: OPTION
Queries the position of the INPUT SELECT switch.
[STX] QVM [ETX] [STX] VMDm [ETX]
m = A: Color
B: Monochrome
Queries the color mode.