Filter
Top Products
– 66 –
AUDIO OUT SET UP menu
Key
F1
F2
F3
F4
F5
F6
F7
F8
F9
Key designation
A/V PHASE°
For adjusting the audio
output phase in relation to
the video phase.
JOG PROC
For setting the digital
process ON/OFF.
VAR PROC
For setting the digital
process ON/OFF.
PB FADE
Playback fade.
PB OUT
Selects the audio output
when playback is started.
PEAK HOLD
For setting the peak hold
of the level meter.
SCALE
For switching the level
meter scale.
EXIT
DATA ADV°
Description
When digital signals output from the unit are processed by an
external unit, a phase difference between video and audio
signals can be produced. Such differences can be eliminated by
adjusting the audio and video signal phases.
≥Refer to “Adjusting the audio output signals in relation to the
video signals.”
Selects the digital processing in the JOG mode.
ON: Performs PCM audio digital processing.
OFF: No PCM audio digital processing.
Selects the digital processing in the VAR mode.
ON: Performs PCM audio digital processing.
OFF: No PCM audio digital processing.
Uses V-fade to instantaneously eliminate the audio noise
occurring during playback at the cut edit points.
ON: Activates the playback V-fade processing at all cut edit
points on the tape.
OFF: No playback V-fade processing.
When shifting from stop to play status, some time elapses before
the audio signals are output. This time lapse can be shortened.
INSTANT
: Shortens the time lapse before audio is output. The
first part of the audio signal to be output, however,
produces an incomplete sound.
Use for transmission purposes is not recommended.
Convenient when used for search operations, for
instance, because the audio signals can be checked
quickly.
DELAYED: Outputs the audio signals as soon as they are
complete.
For holding the peak recording and playback levels.
ON
: Peak level is held.
OFF: Peak level is not held.
For switching the scale of the audio level meter on display to
standard scale or fine scale.
FINE: Scale in 0.2 dB increments. (j24dB to j15dB)
FULL: Standard scale. (j¶ to j0dB)
Refer to “Switching the audio level meter scale” in the AUDIO IN
SET UP menu section (on page 56).
Returns the VTR to the AUDIO OUT menu screen.
0–1 Fr (in increments of 1/10th of a frame):
The amount by which the data is to be advanced when the
digital audio input/output format is in the data mode is
adjusted. (When “0” is set, the amount is set to the default
setting inside the VTR.)
°This item does not function when the E-E through mode (refer to the description of the F2 key on the AUDIO OUT
SET UP STATE menu) has been set.