Panasonic TH-42PX500U Flat Panel Television User Manual


 
19
Auto program is not available while the CableCARD
TM
is
inserted.
You can scan All (Analog and Digital) channels. If needed,
follow the menus and procedures displayed on-screen for
setting up the features.
You can also adjust the settings in Setup menu.
Press to select “Time”.
Press to adjust “Time”.
If the button is held, the speed
of change increases.
Press to select “Time zone”.
Press to select your zone.
Press to select “DST” (Daylight saving).
Press to select “On” or “Off”.
Time
Valid when Mode is set to manual.
Time zone
Valid when Mode is set to “Auto”.
Daylight saving
Valid when Mode is set to “Auto”.
AST EST CST MST PST
NST HST AKST
Clock
Mode
Date
Time
Time zone
DST
Manual
4 / 1 / 2005
9 : 43 AM
EST
Off
Clock
Mode
Date
Time
Time zone
DST
Auto
4 / 1 / 2005
9 : 43 AM
EST
Off
Clock
Mode
Date
Time
Time zone
DST
Auto
4 / 1 / 2005
9 : 43 AM
EST
Off
OK
CH
VOL
CH
VOL
+
-
OK
CH
VOL
CH
VOL
+
-
Auto program
ANT In
Mode
Start scan
Cable
All
Auto program
ANT In
Mode
Start scan
Cable
All
OK
CH
VOL
CH
VOL
+
-
First time setup
Press to select “Auto program”.
Press to display “Auto program” adjust
screen.
1
Press to select “Mode”.
Press to select “All” or “Analog ”.
Press to select “ANT In”.
Press to select “Cable” or “Antenna”.
2
3
Press to select “Start scan”.
Press to start.
Channels available for reception will be
set automatically.
After Auto program is complete, the
unit will return to Manual Program
mode.
4
OK
CH
VOL
CH
VOL
+
-
OK
CH
VOL
CH
VOL
+
-
OK
CH
VOL
CH
VOL
+
-
Press
EXIT
: To exit the menu screen
Now scanning analog channel ...
Progress
Auto program
ANT In
Mode
Start scan
Cable
All
Auto program
OK
CH
VOL
CH
VOL
+
-
First time setup
Language
Clock
Auto program
To make available a channel that has been located by auto
scan, in the Manual program mode, move the cursor to
“Apply” and press
OK
key.