Filter
Top Products
13
Cable Connection
ANT OUTPUT
ANT INPUT
B ANTENNA A
Cable In
Cable Box Connection
Back of the TV
CABLE BOX
Incoming cable
Ferrite core (large size)
(supplied)
• When you enjoy the cable TV programs only, connect the cable TV’s cable to ANTENNA (A). When you enjoy both the
terrestrial TV programs and the cable TV programs, connect the cable TV’s cable to ANTENNA (A), and the terrestrial
antenna cable to ANTENNA (B).
• Select the antenna mode in Input Setup (see page 22).
Less than
4” (10 cm)
CableCARD allows you to tune digital and high definition cable channels through the cable antenna. Consult your cable
company on the availability of CableCARD.
CableCARD Connection
BAANTENNA
SERVCE ONLY
DIGITAL AUDIO
OUT
CABLE CARD
Cable In
INSERT THIS END
POD MODULE
Back of the TV
Upper side of the card
Notes:
• If you experience keyboard or remote control function hang-up when using CableCARD, unplug the TV and plug it back
on and try the controls again. If this condition still exists, please call Panasonic Customer Call Center for further instructions.
• Do not insert a PCMCIA card into CABLE CARD slot.
Procedure
1. Connect the cable antenna to ANTENNA (A).
2. Turn the TV on (see page 19).
3. Set the input mode to TV (see page 20).
4. Insert the CableCARD (as it’s upper side facing to your side) into CABLE CARD slot on the back of the TV.
Follow the messages displayed on the screen.