Filter
Top Products
22
First Time Setup
For your convenience, First Time Setup menu will be displayed on screen when the set is turned on for the first time. If
needed, follow the menus and procedures displayed on-screen for setting up the features.
You can also make the settings in Setup menu (see pages 36, 37).
TV
POWER
VCR DVD
DBS
RCVR
CBL
LIGHT
TV/VIDEO
A -ANTENNA - B
SAP
1 2 3
AUX
A
S
P
E
C
T
M
U
T
E
R
E
C
A
L
L
B
B
E
CH
VOL
CH
VOL
OK
MENU EXIT
Select the configuration of RF input depending on the signal source.
Press to select Input Setup.
Press to select Cable only, Cable/Antenna or
Antenna only.
Press to enter your selection.
This feature allows you to selectively auto scan channels.
You can scan All, Analog only channels or Analog & Digital channels.
Notes:
• If the EXIT button is pressed at anytime during Auto Scan, Auto Scan will be cancelled and the TV will return to the First
Time Setup menu.
• If a CableCARD is present during the First Time Setup and Antenna (A) is set to cable, Antenna (A) will not be scanned
due to the CableCARD providing the channel map.
First Time Setup
Input Setup
Cable/Antenna
Auto Scan
Setting
1
2
CH
VOL
CH
VOL
OK
CH
VOL
CH
VOL
OK
Press to select the sub-menu.
Press to start Auto Scan.
After Auto Scan is completed, the TV tunes to the first channel found during Auto Scan.
CH
VOL
CH
VOL
OK
First Time Setup
Input Setup Scan All
Antenna (A) Analog
Antenna (A) Analog & Digital
Antenna (B) Analog
Antenna (B) Analog & Digital
Auto Scan
CH
VOL
CH
VOL
OK
1
Press to select Auto Scan.
Press to enter the sub-menu field.
2
To return to the previous menu
Press
MENU
.
To exit the menu screen
Press
EXIT
.
Press to start the Auto Scan.
All available channels with a signal will be
programmed into memory.
Auto Scan
Input Setup