Panasonic DMR-ES46V DVD Recorder User Manual


 
13
RQTV0141
(1) Cassette eject button (<, EJECT). . . . . . . . . . . . . . . . . l 24
(2) Disc tray open/close button (<, OPEN/CLOSE). . . . . . l 24
(3) Stop button () . . . . . . . . . . . . . . . . . . . . . . . . . . . . . l 32, 37
(4) Play/t1.3 button (1). . . . . . . . . . . . . . . . . . . . . . . . . l 32, 37
(5) Recording button (¥, REC) . . . . . . . . . . . . . . . . . . . l 25, 57
(6) DVD/VHS POWER on/off button (Í/I, POWER). . . . . . . l 18
To switch the unit from on to standby mode or vice versa.
In the standby mode, the unit is still consuming a small
amount of power.
(7) IN2 input terminals (IN2). . . . . . . . . . . . . . . . . . . . . . . . . l 57
(8) DVD-SEARCH, VHS-REW/FF buttons (V/6, 5/W)
(9) Channel up/down buttons (CH, X, W) . . . . . . . . . . . . . . l 38
(10)DVD/VHS/SD drive indicator
Lights when the DVD, VHS or SD drive is selected.
(11)DRIVE SELECT button
Drive changes each time you press [DRIVE SELECT].
(12)SD card slot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .l 11
(13)Connector for a digital video (DV) camcorder. . . . . . . . l 57
(14)One Touch Transfer (copying) operation button
From VHS to DVD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . l 50
From DVD to VHS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . l 52
Common to DVD/VHS/SD
[A] Recording mode indicator
DVD:
XP, SP, LP, EP: (l 26)
XP SP LP EP (all on): FR mode (l 29)
VHS:
SP, LP°, EP, VP: (l 26)
° Playback only
[B] TV indicator
The indicator lights during the TV mode and it goes out during
the VCR mode. You can switch the mode by using [VCR/TV].
(l 23)
[C] Main display
Current time
Disc recording and play counter
VHS recording and play counter
Transfer (Copying) messages
Miscellaneous messages, etc.
VHS
(1) Scheduled recording indicator ( ) (l 30)
On:
When a scheduled recording program is registered and
recordable tape is inserted.
Flashes:
The scheduled recording indicator flashes when the unit cannot
go to scheduled recording standby (e.g. there is no tape, etc).
(2) Tape indicator
(3) Tape operation status
DVD
(1) Scheduled recording indicator ( ) (l 30)
On:
When a scheduled recording program is registered and a
recordable disc is inserted.
Flashes:
The scheduled recording indicator flashes when the unit cannot
go to scheduled recording standby (e.g. there is no disc, etc).
(2) Disc operation status
(3) Disc indicator
SD
(1) SD Card indicator
Main unit
CH
CH
POWER
DRIVE
SELECT
REC
OPEN/CLOSE
EJECT
S VIDEO
IN 2
VIDEO
/MONO
AUDIO
R
L
COPYING
COPYING
(2)
(1)
(5)
(3)
(4)
(14)
(6)
(7)
(8)
(9)
(11)
(13)
(10)
(12)
The unit’s display
(2)
(3)
(2)
(3) (1)
(1)(1)
[A]
[B]
[C]
Control reference guide
M6VP&PC.book 13 ページ 2006年2月6日 月曜日 午後3時29分