Panasonic DMR-ES46V DVD Recorder User Manual


 
21
RQTV0141
To turn the TV on/off, change the TV input mode, select the TV
channel and change the TV volume by means of this remote control,
set the remote control as follows.
Point the remote control at the TV
While pressing [Í, POWER TV], enter the code
using the numeric buttons.
e.g., 0250: press [0] > [2] > [5] > [0].
Manufacturer and Code No.
Test by turning on the TV and changing channels. Repeat the
procedure until you find the code that allows correct operation.
If your TV brand is not listed or if the code listed for your TV does
not allow control of your TV, this remote control is not compatible
with your TV.
Change the remote control code on the main unit and on the remote
control (the two must match) if you place other Panasonic products
close together. When changing the remote control code, make sure
the two codes are same.
Use “1”, the factory set code, under normal circumstances.
[1] While stopped
Press [FUNCTIONS].
[2] Select “Other
Functions” with [
3, 4]
and press [ENTER].
[3] Select “Setup” with [
3,
4] and press [ENTER].
[4] Select “Setup” with [
3,
4] and press [2, 1].
[5] Select “Remote Control Code” with [
3, 4] and
press [ENTER].
[6] Use [
3, 4] to select the code (1, 2 or 3) and
press [ENTER].
The code on the unit has been set.
[7] While pressing [ENTER], press and hold for
about 2 seconds the numeric button ([1], [2] or
[3]) corresponding to the code you selected in
step 6.
The code on the remote control has been set.
[8] Press [ENTER].
When the following indicator appears on the unit’s
display
The unit’s remote control code
Change the code on the remote control to match the main unit’s
code (l step 7).
To return to the previous screen
Press [RETURN].
To exit the screen
Press [RETURN].
Television operation
Panasonic
National
QUASAR
0051, 0250 PHILIPS (RC-5) 0054
RCA 0047
SAMSUNG 0060, 0587,
0702
FISHER 0154 SANYO 0154
GE 0047 SHARP 0093, 0165
GOLDSTAR 0178, 0317,
0457
SONY 0000
HITACHI 0145 SYLVANIA 0054
JVC 0053 THOMSON 0047
LG 0178, 0317,
0457
TOSHIBA 0156
MAGNAVOX 0054 ZENITH 0017
MITSUBISHI 0150
When other Panasonic products
respond to this remote control
No Disc
FUNCTIONS No Disc
Program
Copy
Other Functions
Setup
ENTER
RETURN
Other settings
M6VP&PC.book 21 ページ 2006年2月6日 月曜日 午後3時29分