Panasonic DMR-ES46V DVD Recorder User Manual


 
68
RQTV0141
Frequently asked questions
Set up Page
Disc Page
Recording Page
What equipment is
necessary to play multi
channel surround sound?
You cannot playback multi-channel sound on this unit without other equipment. You must connect
this unit with a HDMI cable or an optical digital cable to an amplifier with a built-in (Dolby Digital or
DTS) decoder.
An amplifier supporting CPPM and the HDMI standard version 1.1 must be connected to this unit to
play multi-channel audio on a DVD-Audio.
16
Can the headphones and
speakers be directly
connected to the unit?
You cannot directly connect to the unit. Connect through the amplifier etc. 16
The television has S VIDEO
IN terminal, COMPONENT
VIDEO IN terminals and
HDMI IN terminal. Which
should I connect with?
The output picture quality increases in the following order.
- VIDEO IN terminal, S VIDEO IN terminal, COMPONENT VIDEO IN terminals and HDMI IN
terminal. However the unit will take longer to startup when this it is connected with the HDMI IN
terminal.
Is my TV progressive output
compatible?
All Panasonic TVs that have 480p input terminals are compatible. Consult the manufacturer if you
have another brand of TV.
Can I play DVD-Video, DVD-
Audio and Video CDs bought
in another country?
You can play them if the video standard is NTSC.
However, you cannot play DVD-Video if its region number does not include “1” or “ALL”.
Cover
Can a DVD-Video that does
not have a region number be
played?
The DVD-Video region number indicates the disc conforms to a standard. You cannot play discs
that do not have a region number.
Please tell me about DVD-R,
DVD-R DL, DVD-RW, +R,
+R DL and +RW
compatibility with the unit.
The unit records and plays DVD-R, DVD-R DL, DVD-RW (DVD-Video format), +R, +R DL and +RW,
and plays DVD-RW (DVD Video Recording format).
The unit also records and plays high speed recording compatible discs.
After recording but before finalizing +R, +R DL discs
- You may not be able to play and record discs on this unit after recording them on other Panasonic
products or other manufacturer’s equipment.
- You may not be able to play and record discs on other equipment after recording them on this unit.
After finalizing the disc, however, you will be able to play it on any DVD-Video compatible player.
6, 7
6
Please tell me about CD-R
and CD-RW compatibility
with the unit.
This unit plays CD-R/CD-RW discs which have been recorded in one of the following standards:
CD-DA, Video CD, MP3 and still pictures (JPEG/TIFF). Close the session or finalize the disc after
recording. This unit can recognize up to 99 folders (groups) and 999 files (tracks) on a disc with MP3
or still pictures (JPEG/TIFF).
You cannot write to a CD-R or CD-RW with the unit.
7, 34,
35
7
Can I record from a
commercially purchased
video cassette or DVD?
Most commercially sold video cassettes and DVD are copy protected; therefore, recording is usually
not possible.
Can DVD-R, DVD-R DL, DVD-
RW (DVD-Video format), +R,
+R DL and +RW recorded on
the unit be played on other
equipment?
You can play on compatible equipment such as DVD players after finalizing the disc on this unit. It is
not necessary to finalize +RW. However, depending on the condition of the recording, the quality of
the disc and capabilities of the DVD player, play may not be possible. To enable play on other DVD
players, please use “Create DVD Top Menu” in the DVD management menu.
61
Can I record digital audio
signals using the unit?
You cannot record digital signals. The digital audio terminals on the unit are for output only. (The
audio recorded from a digital video camcorder using the DV automatic recording function, for
example, is recorded digitally.)
Can a digital audio signal
from the unit be recorded to
other equipment?
You can record if using the PCM signal. When recording DVD, change the “Digital Audio Output”
settings to the following from the Setup menu.
- PCM Down Conversion “On”
- Dolby Digital “PCM”
- DTS “PCM”
However, only
- As long as digital recording from the disc is permitted.
- As long as the recording equipment is compatible with 48 kHz of sampling frequency.
You cannot record MP3 signals.
64
Can I switch to SAP during
recording?
With DVD-RAM, you can, and the audio recorded also changes. Just press [AUDIO].
With DVD-R, DVD-R DL, DVD-RW (DVD-Video format), +R, +R DL, +RW you cannot. Change
before recording with “Multi-channel TV sound (MTS)” in the Setup menu.
27
64
M6VP&PC.book 68 ページ 2006年2月6日 月曜日 午後3時29分