Panasonic DMR-ES46V DVD Recorder User Manual


 
69
RQTV0141
Troubleshooting guide
Before requesting service, make the following checks. If you are in doubt about some of the check points, or if the remedies indicated in the chart
do not solve the problem, refer to the “Customer Services Directory” on page 77 if you reside in the U.S.A. In other areas, consult your dealer.
Power Page
Displays Page
Operation Page
The following do not indicate a problem with the unit:
Regular disc rotating sound.
Poor reception due to atmospheric condition.
Image disturbance during search.
Periodic interruptions to reception due to satellite broadcasting breaks.
Operations do not work due to a poor-quality disc. (Try again using a Panasonic disc.)
The unit freezes due to the activation of one of its safety devices. (Press and hold [Í/I, POWER] on the main unit for 10 seconds.)
No power Insert the AC power supply cord securely into a known active AC outlet. 14
The unit switches to the
standby mode.
This is a power saving feature. Change “Off Timer” in the “Setup” menu, if you would prefer.
One of the unit’s safety devices is activated. Press [Í/I, POWER] on the main unit to turn the unit
on.
63
The display is dim. Change “FL Display” in the Setup menu. 65
“12:00A” is flashing on the
unit’s display.
Set the clock. 19, 22
The recording time display,
the transfer (copying)
process display and the
displayed recording time of
MP3 are different from the
actual time.
Times shown may disagree with actual times.
In DVD-R, DVD-R DL, +R or +R DL the remaining capacity does not increase even if titles are
deleted.
Available recording space on a DVD-RW (DVD-Video format) or +RW increases when the last
recorded title is deleted. (The recording space may increase slightly when other titles are deleted.)
If you repeat recording or editing about 200 times or more, the remaining capacity of the DVD-R,
DVD-R DL, +R or +R DL is reduced and then recording or editing may be disabled. (For the second
layer on DVD-R DL and +R DL, this happens after about 60 times.)
The time during fast forward and rewind, or the process during transfer (copy) may not be displayed
accurately.
Compared to the actual
recorded time, the elapsed
time displayed is less.