Filter
Top Products
RQT8950
19
During recording
Press [* REC] to select the recording time.
• The unit’s display changes as shown below.
• This does not work during scheduled recordings (Ô page 20) or
while using Flexible Recording (Ô below).
• If you change the channel or recording mode while recording is
paused, the time specified to stop recording is cancelled.
• The unit turns off automatically after the time to stop recording is
reached.
To cancel
Press [* REC] several times until the counter appears.
• The time to stop recording is cancelled; however, recording
continues.
To stop recording partway
Press [g].
The unit sets the best possible picture quality that fits the recording
within the remaining disc space. The recording mode becomes FR
mode. Refer to “FR (Flexible Recording)” (Ô page 17).
Preparation
Select the channel or the external input (IN1, IN2 or DV) to record.
1 While stopped
Press [F Rec].
2 Press [w,q] to select “Hour” and
“Min.” and press [e,r] to set the
recording time.
• You can also set the recording time with the numbered
buttons.
• You cannot record for more than 8 hours.
3 When you want to start recording
Press [e,r,w,q] to select “Start” and
press [ENTER].
Recording starts.
To exit the screen without recording
Press [RETURN].
To stop recording partway
Press [g].
To show the remaining time
Press [STATUS].
Press [q] (PLAY) during recording.
• There is no sound output while searching forward or backward.
To stop play
Press [g].
To stop recording
2 seconds after play stops
Press [g].
To stop scheduled recording
1 Press [g] to stop playing.
2 After 2 seconds, press [g].
3 Press [w,q] to select “Stop recording” and press [ENTER].
1 Press [DIRECT NAVIGATOR] during
recording.
2 Press [e,r,w,q] to select a title and
press [ENTER].
• There is no sound output while searching forward or
backward.
To stop play
Press [g].
To stop recording
1 Press [g] to stop playing.
2 Press [DIRECT NAVIGATOR] to exit screen.
3 Press [g].
To stop scheduled recording
1 Press [g] to stop playing.
2 Press [DIRECT NAVIGATOR] to exit screen.
3 Press [g].
4 Press [w,q] to select “Stop recording” and press [ENTER].
Press [AUDIO].
• If you change the sound setting while recording, the recorded
sound will also change.
Select the audio (Main or SAP) in “Multi-
channel TV Sound ( MTS )” in the Setup
menu (Ô page 39).
To specify a time to stop recording
–One Touch Recording
Flexible Recording
(Recording that fits the remaining disc space)
OFF 0:30 OFF 1:00 OFF 1:30 OFF 2:00
OFF 4:00 OFF 3:00
Counter (cancel)
RAM -R -R DL -RW(V) +R +R DL +RW
Flexible Recording
Record in FR mode.
Max recording time 8 Hour 00 Min.
1 Hour 30 Min.
CancelStart
Set recording time
Maximum recording
time
This is the maximum
recording time in FR
mode.
Rec. 0:59
Stereo
DVD-RAM
CH 71
Remaining
time of
recording
e.g., DVD-RAM
Playing while you are recording
Playing from the beginning of the title you are
recording–Chasing playback
Playing a title previously recorded while recording–
Simultaneous rec and play
Selecting audio to record
RAM
RAM
Stereo:
SAP
Audio:
Mono:
Main audio (stereo)
• If the broadcast is “Mono+SAP”, audio will be
monaural even if you select Stereo mode.
Secondary audio program (SAP)
• If recorded in SAP mode, main audio is also
recorded.
Main audio (monaural)
• Select “Mono” if reception is poor during a
stereo broadcast.
CH 12
Stereo
DVD-RAM
((
e.g., “Stereo” is selected
“((” appears when the unit is receiving the audio type you selected.
-R -R DL -RW(V) +R +R DL +RW
Recording television programs