Filter
Top Products
Recording
28
VQT0R73
[RAM] [-R] [-RW‹V›] [+R]
∫Scheduled recording automatically starts at the set
time.
≥Scheduled recording can be started only when the unit is turned off.
About 1 minute before the scheduled recording starts, the unit
switches on. When it finishes, the unit switches back off. If another
program is also being played back, the unit does not switch back
off.
∫Scheduled recording cannot be activated on both DVD
and VHS at the same time.
Make sure the scheduled recording start times do not overlap on
both DVD (l 29) and VHS (l 51) Scheduled Recording List
screens.
When the scheduled recording settings overlap:
≥When the start time of both scheduled recordings is the same, the
scheduled recording of the last one set has priority.
You can enter up to 16 programs a month in advance.
Preparation
≥Release protection (disc l 30, cartridge l 30) [RAM].
≥Insert a disc (l 8) and confirm there is sufficient empty space for
recording on it (l 45).
≥Check that the clock is set to the correct time.
Entering the PlusCode
®
numbers is an easy way of scheduled
recording. You can find these codes in TV listings in newspapers and
magazines.
≥When connecting a cable TV box or satellite receiver, the VCR
Plus
i system does not work. Program the scheduled recording
manually (l 29).
[1] Press [VCR Plus_].
[2] Press the numbered buttons to enter the
PlusCode number.
≥Press [2] to move back to correct a digit.
[3] Press [ENTER].
≥Confirm the program and correct it if necessary using [3, 4,
2, 1] (“Manual programming” l 29, step 2).
≥When “XP” is displayed in the unit’s display, the recording
mode automatically changes to “FR” in order to prevent loss of
recording when there is not enough space. Change to “XP”
mode if you want to set scheduled recording using “XP” mode.
≥“Invalid Entry” is displayed when you enter the wrong PlusCode
number. Reenter the PlusCode number.
≥To enter the name of the program
Press [2, 1] to select “Title Name” and press [ENTER]
(l 32).
[4] If the program is correct
Press [ENTER].
≥Make sure that the scheduled recording has been programmed
correctly on the SCHEDULED LIST screen (l 29).
≥Repeat steps 1–4 to program other recordings.
[5] Press [SCHEDULE].
≥The message “Turn recorder off for Scheduled Recording.” is
shown on the TV.
[6] Press [Í, DVD/VHS POWER].
≥Scheduled recording can be started only when the unit is
turned off.
≥The unit turns off and “ ” lights on the unit’s display to indicate
scheduled recording standby has been activated.
∫To release the unit from scheduled recording standby
Press [Í, DVD/VHS POWER].
The unit turns on and “ ” goes out.
≥Be sure to press [Í, DVD/VHS POWER] to return the unit to
standby mode before the scheduled recording time. Scheduled
recording will work only if “ ” is displayed.
∫To stop recording while a program is working
[1] Press [DVD]
[2] Press [∫, STOP], then [ENTER] within 5 seconds.
≥You can also press and hold [∫] on the main unit for 3 or more
seconds to stop recording.
Note
Refer to Note in Manual programming (l 29).
Preparation
≥Press [DVD].
Cautions for using scheduled recording
on DVD
Scheduled Recording
SKIP/INDEX
SLOW/
SEARCH
REW
FF
PLAY
S
SCHEDULE
OPERATION
SELECT
DVD ERASE
REC
REC MODE
ADD/DLT
POWER
TIME SLIP
FUNCTIONSDIRECT NAVIGATOR
TOP MENU
RETURN
CM SKIP
CANCEL/RESET
VOLUME
CH
INPUT SELECT
STATUSDISPLAY
AUDIO
TV
TV/VIDEO
VHS
DVD
TRACKING/V-LOCK
SUB MENU
DVD/VHS POWER
VCR Plus+
COPYING
VHS DVD
CREATE
CHAPTER
VCR/TV
JET REW
SCHEDULE
REC MODE
DVD
VCR Plus+
CANCEL
DVD
VCR Plusi
SCHEDULE
REC MODE
∫
3, 4, 2, 1
ENTER
Í
DVD/VHS POWER
Numbered
buttons
∫ Using VCR Plus_ system
VCR Plus+ Remaining Recording Time VHS 1:43 SP DVD 1:43 SP
11/15 Tue 8:34 PM
Press ENTER to store new schedule
SCHEDULED
RECORDING
Remaining Recording Time VHS 1:43 SP DVD 1:43 SP
11/15 Tue 8:34 PM
39 11/29 Tue 10:00 PM 11:00 PM DVD
Title Name
SP
Channel Date On Off Drive Mode
DVD
ES40VP&PC.book 28 ページ ２００５年９月６日 火曜日 午前１０時２３分